DirectFB - Home of the pragmatist Roadmap


[directfb-users] Re: How to make the DirectFB on top CLE266 work
Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[directfb-users] Re: How to make the DirectFB on top CLE266 work



After I installed libmpeg3 library, I tried your trick, but it doesn't
work either.
From the following messages, do you know why?
===============================

viapvr:~# df_layer tdmpeg120.mpv

---------------------- DirectFB v0.9.20 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2003 convergence GmbH
-----------------------------------------------------------

(*) Single Application Core. (with MMX support) (2003-11-15 01:24)
(*) DirectFB/misc/memcpy: using MMXEXT optimized memcpy()
(*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media GmbH)
(*) MMX detected and enabled
(*) DirectFB/GraphicsDevice: MMX Software Rasterizer 0.6 (convergence
integrated media GmbH)
(*) DirectFB/Layer: Enabled 'FBDev Primary Layer'.
(#) DirectFBError [dfb->CreateVideoProvider failed]: Interface
implementation not available!
viapvr:~# df_layer tdmpeg120.mpv

---------------------- DirectFB v0.9.20 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2003 convergence GmbH
-----------------------------------------------------------

(*) Single Application Core. (with MMX support) (2003-11-15 01:24)
(*) DirectFB/misc/memcpy: using MMXEXT optimized memcpy()
(*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media GmbH)
(*) MMX detected and enabled
(*) DirectFB/GraphicsDevice: MMX Software Rasterizer 0.6 (convergence
integrated media GmbH)
(*) DirectFB/Layer: Enabled 'FBDev Primary Layer'.
(#) DirectFBError [dfb->CreateVideoProvider failed]: Interface
implementation not available!
===============================

Best regards,

/edward


Andreas Robinson wrote:

>Yidan(Edward) Zhou wrote:
>
>  
>
>>I am working on a PVR box based on VIA EPIA-M motherboad. I tried to
>>install the Linux driver and DirectFB for the VIA graphic chip, but it
>>seems that the driver for the CLE266 chip doesn't work properly. How can
>>I make the VIA CLE266 Overlay working?
>>    
>>
>
>Have you tried the "dfb_layer" example? (It's in the DirectFB-examples
>package)
>
>I installed the DirectFB's libmpeg3 video provider and downloaded this
>MPEG-2 test stream:
>http://teco.emg.hu/tdmpeg120.mpv
>
>I renamed the file test.mpg and wrote:
>./df_layer test.mpeg
>
>It's not fast, but it lets you see if it works.
>
>Regards,
>Andreas
>
>
>
>  
>




-- 
Info: To unsubscribe send a mail to ecartis@directfb.org with 
"unsubscribe directfb-users" as subject.



Home | Main Index | Thread Index


directfb.org / Development / Old Archives