[directfb-users] fbset and kernel disagree

[tarass@club-internet.fr]

Hello,


Dmesg gives :

matroxfb: Matrox G550 detected
matroxfb: MTRR's turned on
matroxfb: 1024x768x16bpp (virtual: 1024x8190)
matroxfb: framebuffer at 0xE4000000, mapped to 0xd0805000, size 33554432
Console: switching to colour frame buffer device 128x48
fb0: MATROX VGA frame buffer device
...
matroxfb_crtc2: secondary head of fb0 was registered as fb1


It founds my Matrox G500 and 32Mb
but fbset -i gives

mode "1024x768-60"
    # D: 64.994 MHz, H: 48.359 kHz, V: 59.998 Hz
    geometry 1024 768 1024 8190 16
    timings 15386 160 32 30 4 128 4
    accel true
    rgba 5/11,6/5,5/0,0/0
endmode

Frame buffer device information:
    Name        : MATROX
    Address     : 0xe4000000
    Size        : 16773120
    Type        : PACKED PIXELS
    Visual      : TRUECOLOR
    XPanStep    : 8
    YPanStep    : 1
    YWrapStep   : 0
    LineLength  : 2048
    MMIO Address: 0xe6000000
    MMIO Size   : 16384
    Accelerator : Matrox G400

Only G400 and 16 Mb

Is there something to correct ?

Nicolas.

--
   Powered           .~.
   by Linux          /V\
    ------          // \\
 solutions for     /(   )\
 smart penguins     ^`~'^



--
Info: To unsubscribe send a mail to ecartis@directfb.org with 
"unsubscribe directfb-users" as subject.