DirectFB - Home of the pragmatist Roadmap


[directfb-users] Re: [MPlayer-users] Re: fbset 50hz pal
Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[directfb-users] Re: [MPlayer-users] Re: fbset 50hz pal



maybe you can use directfb?

I've had very good results using directfb on a G550
with fusion patch and the dfbmga
You don't set the tvout mode in fb.modes

but in /etc/directfbrc

( from the readme on ville's site:)

 matrox-crtc2
 matrox-tv-standard=pal or ntsc

see

http://www.sci.fi/~syrjala/directfb/Matrox_TV-out_README.txt


On Sun, 16 Nov 2003 tarass@club-internet.fr wrote:

> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> Le 11/16/2003 01:32 PM, tarass@club-internet.fr a joliment crit :
> >
> > Hello,
> >
> > I did not find settings to put in /etc/fb.modes to switch to 50hz
> > vertical refresh for pal tv output.
> > Are they useless, and if not where can I find them ?
> >
> > I'm still have problem with the tv output with matrox G550: the tv did
> > don't get the synchro, I see some images but it's flashing.
>
> I tryed
>
> mode "pal"
>      # H: 15.625 kHz, V: 50.081 Hz
>      geometry 640 256 640 256 4
>      timings 70484 106 86 40 14 76 2
>      bcast true
> endmode
>
> from
>
> http://www.fifi.org/doc/fbset/examples/fb.modes.PAL.gz
>
> It doesn't work. Am I on the right way ?
>
> Please help me, I'm close to give up.
>
> Nicolas.
>
> --
>     Powered           .~.
>     by Linux          /V\
>      ------          // \\
>   solutions for     /(   )\
>   smart penguins     ^`~'^
>
> _______________________________________________
> RTFM!!!  http://www.MPlayerHQ.hu/DOCS
> Search:  http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>



--
Info: To unsubscribe send a mail to ecartis@directfb.org with
"unsubscribe directfb-users" as subject.



Home | Main Index | Thread Index


directfb.org / Development / Old Archives