DirectFB - Home of the pragmatist Roadmap


[directfb-users] Installation troubles CLE266
Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[directfb-users] Installation troubles CLE266



Hi,

I ran into trouble trying to run DirectFB on a CLE266. Use-case: I want to
run MythTV, select a movie via its frontend (that is shown via the PVR350
output using ivtv-fb). After selection of the movie, I want to watch it
via the EPIA/CLE266 TV-Out using DirectFB (so I have to switch the input
of the TV: SCART1->SCART2). However, after modprobing cle266vgaio, when I
run dfbinfo, an error occurs and I (being a total n00b at this) don't
understand why. Below, you find the output of lsmod and dfbinfo.

Gentoo linux-2.4.24-epia1
DirectFB 0.9.20 (cle266vgaio from CVS)
EPIAM9000
In grub.conf, I added "video=vesa:ywrap,vram:32" to the kernel command line.

Can someone shed some light on this? Please tell me if you need additional
information.

Thanks,
Milan

---------------------------------------------------------
dfbinfo:

       ---------------------- DirectFB v0.9.20 ---------------------
             (c) 2000-2002  convergence integrated media GmbH
             (c) 2002-2003  convergence GmbH
        -----------------------------------------------------------

(*) Single Application Core. (2004-02-10 17:10)
(*) DirectFB/misc/memcpy: using linux kernel memcpy()
(*) DirectFB/InputDevice: LIRC Device 0.2 (convergence integrated media GmbH)
(*) DirectFB/InputDevice: IMPS/2 Mouse (1) 0.9 (convergence integrated
media GmbH)
(*) DirectFB/InputDevice: IMPS/2 Mouse (2) 0.9 (convergence integrated
media GmbH)
(*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/GraphicsDevice: VIA/S3G UniChrome 0.3 (-)
(!) DirectFB/core/fbdev: Unsupported pixelformat: rgba 8/0, 8/8, 8/16,
8/24 (32bit)
(!) DirectFB/Core/layers: Setting default/last configuration failed!
(!) DirectFB/Core/layers: Failed to enable primary layer!
(!) DirectFB/Core: Could not initialize 'layers' core!
    --> Not supported!
(!) DirectFB/Core: Error during initialization (Not supported!)
(#) DirectFBError [DirectFBCreate() failed]: Not supported!

---------------------------------------------------------

---------------------------------------------------------
lsmod:

Module                  Size  Used by    Not tainted
cle266vgaio             1624   0
viafb                 147396   0  (unused)
fbgen                   3252   0  [viafb]
ohci1394               24456   0  (unused)
ehci-hcd               16872   0  (unused)
snd-pcm-oss            36836   0
snd-mixer-oss          12048   1  [snd-pcm-oss]
snd-via82xx            11808   1  (autoclean)
snd-pcm                58144   0  (autoclean) [snd-pcm-oss snd-via82xx]
snd-ac97-codec         38424   0  (autoclean) [snd-via82xx]
snd-mpu401-uart         3152   0  (autoclean) [snd-via82xx]
snd-rawmidi            13440   0  (autoclean) [snd-mpu401-uart]
snd-page-alloc          6260   0  (autoclean) [snd-via82xx snd-pcm]
snd-seq-oss            26112   0  (unused)
snd-seq-midi-event      3520   0  [snd-seq-oss]
snd-seq                34160   2  [snd-seq-oss snd-seq-midi-event]
snd-timer              13828   0  [snd-pcm snd-seq]
snd-seq-device          4016   0  [snd-rawmidi snd-seq-oss snd-seq]
snd                    32132   0  [snd-pcm-oss snd-mixer-oss snd-via82xx
snd-pcm snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-oss
snd-seq-midi-event snd-seq snd-timer snd-seq-device]
lirc_i2c                4000   1
lirc_dev                8848   1  [lirc_i2c]
ivtv-fb                13944  65
fbcon-cfb32             4136   0  [viafb ivtv-fb]
ivtv                   79532   3  [ivtv-fb]
msp3400                16748   1
saa7127                 3416   0  (unused)
saa7115                 5944   0  (unused)
tuner                  10272   1
videodev                6144   4  [ivtv]
i2c-algo-bit            7240   0  [ivtv]
i2c-core               14948   0  [lirc_i2c ivtv msp3400 saa7127 saa7115
tuner i2c-algo-bit]
---------------------------------------------------------




-- 
Info: To unsubscribe send a mail to ecartis@directfb.org with 
"unsubscribe directfb-users" as subject.



Home | Main Index | Thread Index


directfb.org / Development / Old Archives