DirectFB - Home of the pragmatist Roadmap


[directfb-users] Re: NSC GX1 16x9 modes
Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[directfb-users] Re: NSC GX1 16x9 modes



On Sun, Aug 01, 2004 at 10:28:02PM -0500, Brian G. Rhodes wrote:
> Sorry,
> 
> Yes I am.  I was just using the 1280x1024 in the SetVideoMode to try to
> find where the problem is.  When I use 1368x768-16 in there
> (SetVideoMode(dfb, 1368, 768, 16);) I get distorted graphics on the
> framebuffer.  In my test I had 3 sub surfaces with 3 gifs.  One of them
> was about 400 pixels in height.  That was the only one to display as
> it's y position was 0.  It ended up being stretched the entire height of
> the screen, and I could see blank lines from the interlacing (on the
> graphic).  It looks like it's doing interleaving.

Do the DirectFB-examples programs (eg. df_dok) work? If not you can test 
if the problem is in the nsc gfxdriver by using the no-hardware option.

<snip>
> DirectFB only cares that there is enough video memory for the surface at
> a resolution correct?

For fbdev primary surfaces it only cares that the fbdev driver signals 
success.

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/




Home | Main Index | Thread Index


directfb.org / Development / Old Archives