[directfb-users] Re: how can i set up xine to use directfb

["h.engemann@basicartstudios.de" <h.engemann@basicartstudios.de>]

one more,
I can hear sound but no TV out when i use layer=2,
when I use layer 1 or 0 i have the picture on my monitor.


here comes some more info by starting a file:

(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.

      ---------------------- DirectFB v0.9.21 ---------------------
            (c) 2000-2002  convergence integrated media GmbH
            (c) 2002-2004  convergence GmbH
       -----------------------------------------------------------

(*) DirectFB/Core: Multi Application Core. (2005-01-04 17:10)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'Fusion Dispatch' (MESSAGING, 5036)...
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 5047)...
(*) Direct/Modules: suppress module 'joystick'
(*) Direct/Modules: suppress module 'lirc'
(*) Direct/Modules: suppress module 'ps2mouse'
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5048)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: Matrox G450 0.7 (convergence integrated media GmbH)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
df_xine: here we go!
df_xine: scanning layers for a suitable one
df_xine: probing layer 3
df_xine: -> has a surface
df_xine: -> trying to access...ok
df_xine: -> checking if double-buffering is supported...yes
df_xine: -> checking if RGB32 is supported...no
df_xine: -> checking if RGB24 is supported...no
df_xine: -> checking if RGB16 is supported...no
df_xine: -> not enough!
df_xine: no suitable layer found
df_xine: falling back to primary layer :(
DFB [Unofficial DirectFB video driver]
video_out_dfb: MMX detected and enabled
audio_alsa_out : supported modes are 8bit 16bit 24bit 32bit mono stereo 
(4-channel not enabled in xine config) (4.1-channel not enabled in xine 
config) (5-channel not enabled in xine config) (5.1-channel not enabled 
in xine config) (a/52 and DTS pass-through not enabled in xine config)
xine: found input plugin  : file input plugin
failed to read 8 bytes at pos 1303234928
xine: found demuxer plugin: AVI/RIFF demux plugin
df_xine: probing video mode 768x576@16...accepted
df_xine: probing video mode 768x576@32...not better
df_xine: probing video mode 720x576@32...accepted
df_xine: probing video mode 720x576@16...not better
df_xine: video mode 720x576@16 already set
ffmpeg_video_dec: direct rendering enabled
video_out_dfb: video frame format is YV12
fixing sound card drift by -2481 pts
fixing sound card drift by -1864 pts
fixing sound card drift by -1402 pts