DirectFB - Home of the pragmatist Roadmap


[directfb-users] problem with radeon driver
Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[directfb-users] problem with radeon driver



Even though I've patched the radeonfb driver to set accelerator id,
DirectFB doesn't seem to pick it up. This is using vdr & softdevice
output plugin;

[root@vigor10 VDR]# ./rundfb
[softdevice] processing args
[softdevice]   argv [0] = softdevice
[softdevice]   argv [1] = -vo
[setup-softdevice] alsa device set to: hw:0,2
[setup-softdevice] A/V Offset set to (-8)
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] deinterlace method set to 1 lavc
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (YUV2)
[setup-softdevice] startup aspect set to (16:9 wide)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg version(0.4.9-pre1) build(4736)
[dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.

       ---------------------- DirectFB v0.9.21 ---------------------
             (c) 2000-2002  convergence integrated media GmbH
             (c) 2002-2004  convergence GmbH
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2005-01-14 15:11)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 10190)...
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 10213)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 10214)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (convergence
integrated media GmbH)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 67108864 bytes
[dfb] Accellerated Functions: none
[dfb] Drawing Flags: none
[dfb] Surface Blitting Flags: none
[dfb] Supported video Modes are: 640x480@8 640x480@8 640x480@8 640x480@8
640x480@8 800x600@8 800x600@8 800x600@8 800x600@8 800x600@8 800x600@8
800x600@8 800x600@8 1024x768@8 1024x768@8 1024x768@8 1024x768@8
1024x768@8 1024x768@8 1024x768@8 1152x864@8 1152x864@8 1152x864@8
1152x864@8 1152x864@8 1152x864@8 1024x1024@8 1280x1024@8 1280x1024@8
1280x1024@8 1280x1024@8 1280x1024@8 1600x1200@8 1600x1200@8 1600x1200@8
1280x720@16 1280x720@32 720x576@32
[dfb] Enumeratig display Layers
Layer 0 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
[dfb]: could not find suitable videolayer
 (!!!)  *** WARNING [Application exited without deinitialization of
DirectFB!] *** [core.c:630 in dfb_core_deinit_check()]

[root@vigor10 VDR]# fbset -i

mode "1280x720-50"
    # D: 61.801 MHz, H: 37.501 kHz, V: 50.001 Hz
    geometry 1280 720 1280 720 32
    timings 16181 218 110 20 5 40 5
    accel true
    rgba 8/16,8/8,8/0,0/0
endmode

Frame buffer device information:
    Name        : ATI Radeon QD
    Address     : 0xd0000000
    Size        : 67108864
    Type        : PACKED PIXELS
    Visual      : DIRECTCOLOR
    XPanStep    : 8
    YPanStep    : 1
    YWrapStep   : 0
    LineLength  : 5120
    MMIO Address: 0xd9000000
    MMIO Size   : 16384
    Accelerator : Unknown (38)

Ideas?

-- 
Torgeir Veimo <torgeir@pobox.com>





Home | Main Index | Thread Index


directfb.org / Development / Old Archives